China Wholesale Multi Cell Seed Trays Factory – 50cells Seeding Tray For Transplanting Machine – RongXing

How to water the seedling tray?

1. Because the volume of seedling tray is relatively small, it is easy to lose water. Watering shall be carried out at any time according to the dryness of the soil.

2. The atomizer shall be selected when watering, which will reduce the water pressure and prevent the scanning from being damaged.

3. Water spraying can be carried out in pieces, so that it can be poured more thoroughly.

4. In order to make the soil absorb water better, spray it once, and then spray it again later, until water flows from the bottom of the seedling tray, indicating that it has been watered thoroughly.

5. In order to prevent ponding, after watering, tilt each seedling basin of the seedling tray to fully drain the ponding.

6. You can also use the method of water inflow to water, that is, put the seedling tray into the basin, and the water in the basin is about 1 / 2 of that in the seedling basin. In this way, soaking for 3 ~ 5 minutes can fully water the soil in the feather tray. Then take out the seedling tray.

Advantages of seedling tray

(1) Improve the working environment and facilitate manual operation. You can sit in the rest room of the greenhouse, put the hole plate on the console, and sow or divide seedlings into the hole plate. Put it in the greenhouse after homework.

(2) Save nursery site and reduce cost. Use the hole plate to sow, let the seedlings grow in the hole plate, and then move them into the seedling raising bowl, or trenching, or planting; Sow seeds in the seedling tray, move the seedlings into the hole tray, and then move them into the seedling bowl, or trenching, or planting; In this way, the land occupation is small, especially suitable for cultivating seedlings when the temperature is low in early spring, and then moving to other protected areas to cultivate seedlings after the external temperature rises, which can reduce the heating cost. If larger seedlings are not used for colonization, hole plate seedlings can be directly used for cultivation.

(3) It is convenient for standardized operation. It can be sown by machine, which is suitable for industrialized large-scale seedling raising, with labor-saving, labor-saving and high efficiency. At present, hole tray is used in industrialized seedling raising in China.

(4) Effectively curbed the spread of soil diseases. Since one seed is planted in one hole and one plant is planted in one hole during seeding, they are separated from each other, so soil diseases can not spread.

(5) When moving into a larger container or seedbed to cultivate large seedlings, the seedlings will not slow down and the seedling rate is high. Direct planting with plug seedlings, as long as the open weather conditions are not very bad and the slow seedling period is short.

(6) Convenient transportation. In the transport vehicle, the cavity plate can be placed in three-dimensional and multi-layer, which is very suitable for long-distance transportation. It is very convenient to transport from the sowing room to the seedling forming room, or to move the hole plate seedlings from the high temperature to the low temperature, from the relatively weak light to the strong light, or from the seedling raising room to the cultivated land for planting

Seeding tray is the most fundamental change in modern horticulture, which provides a guarantee for rapid and mass production. Seedling tray has become an important tool in the production process of factory seedlings. The seedling tray is made of PET material, which is non-toxic and environmentally friendly, with good toughness and good air permeability. It is added with anti-aging agent and durable to extend its service life. The shape of the hole in the seedling tray is dome, and there is a hole at the bottom of the tray to prevent the water from rot and die, suitable for substrate breeding of various plants such as vegetables, flowers, trees, etc.

Our Advantages

1.In the process of seeding by filling, sowing and accelerating germination, the seedling raising by the hole and dish can be
completed by the machine, which is simple, fast and suitable for large-scale production.
2. Evenly distributed seeds, high seedling rate and reduced seed cost.

3. The seedlings in each hole are relatively independent, which not only reduces the transmission of diseases and insect pests
among each other, but also reduces the nutrient competition among seedlings, and the root system can be fully developed.
4. Increase seedling density, facilitate intensive management, improve the utilization rate of greenhouse, and reduce production
costs.

5. Unified seeding and management can make seedling growth and development consistent and improve seedling quality, which is
conducive to large-scale production.
6. Simple and convenient seedling raising and transplanting without damaging root system, high survival rate of transplanting and
short slow seedling period.
7. The seedlings are easy to be stored and transported.

8. Unified seeding and management can make seedling growth and development consistent and improve seedling quality, which is
conducive to large-scale production.
9. Simple and convenient seedling raising and transplanting without damaging root system, high survival rate of transplanting and
short slow seedling period.
10. The seedlings are easy to be stored and transported.

FAQ

Q 1 ：How to produce customized products ?

A : Yes , we can produce by your samples or technical drawings . We can build the molds and fixtures .

Q 2 ： How to get a sample ?

A : We can supply the sample if we have ready parts in stock .

Q 3 ：Do you test all your goods before delivery ?

A : Yes , we have 1 0 0 % test before delivery.

Q4：What is the samples fee ?

A: If you have freight collect express account such as UPS,FEDEX,we can send the sample for free(Special design will charge sample cost,and return after order).But if you haven’t the account,we should ask the shipping charges..

Q 5 : How do you make our business long – term and good relationship ?

A : 1 . We keep good quality and competitive price to ensure our customers benefit :
      2 . We respect every customer as our friend and we sincerely do business and make friends with them ,no matter where they come from .